Trench Decay Difficulties: Wave & Gas Scaling Guide - Guide

Trench Decay Difficulties: Wave & Gas Scaling Guide

Learn how Trench Decay difficulties scale: enemy wave intensity, gas push timing, extraction pressure, and the best squad setup for each difficulty tier.

2026-10-08
Trench Decay Wiki Team
Quick Guide
  • Trench Decay difficulties scale through enemy wave intensity, gas push frequency, and extraction pressure
  • Gas timers shorten sharply on higher tiers — looting too deep is the top cause of squad wipes
  • Squad composition matters more than raw DPS as difficulty climbs; Medic and Support become core picks
  • Extraction windows tighten at higher tiers: defend the zone as a unit, never sprint in solo
  • Best approach: relearn wave pacing on a lower tier first, especially after the DUAL update's balance pass

How Difficulties Scale in Trench Decay

Trench Decay difficulties don't work as separate game modes — difficulty is baked into the campaign's progression and your chosen challenge level. Each tier intensifies three levers at once: enemy wave composition (more specialists, heavies, and infiltrators), gas push frequency (shorter warning windows and faster map shrinkage), and extraction pressure (harder final-wave defense and tighter hold timers). Understanding these three levers is the difference between a clean haul and a full squad wipe.

Video Highlights:

  • Official trailer from Studio Rook's channel showing the WW1 squad PvE loop
  • Showcases gas assaults, trench defense, and extraction tone of the game
  • Useful reference for how escalating pressure is presented on screen
Scaling LeverLow TierMid TierHigh Tier
Wave profileLight infantry trickleMixed units + specialistsShock waves, shielded and heavy units
Gas timingLong warning surgesPeriodic pushes, sector halvesNear-continuous pressure
ExtractionGenerous hold timerStandard zone defenseTight timer + infiltrators on route
Best class focusRifleman / ScoutAssault + MedicSupport LMG + Engineer + Medic
Editor's Note

Difficulty in Trench Decay is systemic, not cosmetic. If a run feels suddenly harder after the DUAL update, it likely is — the update shipped a broad balance pass on enemy pressure and wave pacing, so relearn pacing before pushing higher tiers.

Campaign Chapters vs. Difficulty Curve

The campaign itself acts as a difficulty ladder. Each chapter introduces heavier waves and more aggressive gas mechanics, so even within one difficulty tier your squad faces steadily escalating pressure. The table below maps each chapter's threat profile.

ChapterWave ProfileGas MechanicDifficulty Feel
1 — First DeploymentLight infantry, slow spawnsIntro surges, long warnings★☆☆☆☆ Tutorial
2 — The Forward LineMixed infantry, first armored raidersSector shrinks in halves★★☆☆☆ Easy
3 — No Man's LandOpen charges + flank partiesDirectional gas, watch wind★★★☆☆ Moderate
4 — The StrongpointSiege waves, shielded heaviesGas surge after each big wave★★★★☆ Hard
5 — The BreakthroughFast shock waves, rear infiltratorsRapid, near-continuous timers★★★★☆ Hard
6 — Final StandOverwhelming all-specialist wavesTotal gas advance, last pocket★★★★★ Brutal

Chapters 1-2: Learning

  • Learn trench layout and funnels
  • Barricade the two main chokepoints
  • Save grenades for clustered groups

Chapters 3-4: Holding

  • Wire the flank routes early
  • Assign one player per flank
  • Concentrate LMG fire at strongpoint chokes

Chapters 5-6: Surviving

  • Barricade the extraction corridor from wave one
  • Stack ammo crates pre-wave
  • Overlapping fire lanes in circular defense
Watch the Wind

In Chapter 3 and beyond, gas becomes directional and drifts from the enemy side. Watch the wind indicators — a "safe" trench on one run can be a death pocket on the next.

Step-by-Step: Preparing for a Higher Difficulty

1

Run one tier lower first

Use a lower-difficulty run to relearn wave pacing and map changes, especially post-DUAL where encounter structure shifted meaningfully. Memorize safe dugouts and bunkers in low-risk runs so late-campaign retreats become muscle memory.

2

Rebuild your loadout for sustain

Higher tiers punish greed. Favor high-capacity automatics (LMG class) for lane holding and shotguns for trench chokepoints. Recheck your favorite gun's stats in-game — the DUAL balance pass toned down some previously dominant weapons.

3

Assign lanes, not positions

Give each player a firing lane (left trench, center, right flank) rather than a fixed spot. Lanes keep coverage intact when someone falls back to revive or resupply.

4

Time your gas retreats

Gas advances in surges with warning windows. Retreat right as a surge starts — retreating early wastes loot time, retreating late costs the run.

5

Defend the extraction, don't sprint it

Arrive at the zone as a squad, set up facing enemy spawn funnels, and defend the hold timer. Solo sprint-ins are how high-tier runs end with nothing.

Team Core

On the hardest content, the winning squad core is Support (ammo crate + LMG suppression), Medic (positioned one trench behind the front), and Engineer (pre-built barricades and wire between waves).

Class Value at Each Difficulty Tier

ClassLow Tier ValueHigh Tier ValueWhy It Changes
Rifleman★★★★★★★★☆☆Solid all-rounder, outscaled by specialist roles under pressure
Assault/Raider★★★☆☆★★★★☆Smoke crossing and close-range trench clearing scale well
Medic★★☆☆☆★★★★★Long waves and gas pushes make revive speed decisive
Support/Gunner★★★☆☆★★★★★Suppression and squad-wide resupply shine against heavy waves
Engineer★★☆☆☆★★★★★Barricades and wire buy seconds that save runs
Scout/Marksman★★★★☆★★★☆☆Great early and on open maps; less raw output in last stands
Revive in Pairs

One player covers while the Medic revives — every time. Solo revives during a wave are how squads snowball from one down into a full wipe on high difficulties.

High-Difficulty Readiness Checklist

Before Pushing Higher Tiers:

  • Complete a full lower-tier run without squad wipes
  • Memorize safe dugouts and bunker pockets on every sector
  • Own at least one S-tier lane weapon (LMG or heavy shotgun)
  • Confirm squad lane assignments and the designated Medic position
  • Pre-plan the extraction corridor and barricade it from wave one

FAQ

Q: What makes Trench Decay difficulties harder as the campaign goes on?

Three levers scale together: enemy waves gain specialists, shielded heavies, and infiltrators; gas pushes come faster with shorter warning windows; and extraction zones require defending under heavier final-wave pressure. Chapter 6 combines all of these into a near-endless last stand.

Q: Should I change my loadout for higher difficulty tiers?

Yes. Shift toward sustain: high-capacity automatics for lane holding, shotguns for chokepoints, and Support ammo crates instead of everyone carrying spare magazines. Also recheck weapon stats after the DUAL update's balance pass before a serious run.

Q: Which classes matter most at high Trench Decay difficulties?

Medic, Support, and Engineer become core picks. Revive speed keeps squads alive through long gas pushes, LMG suppression handles grouped waves, and pre-built barricades plus barbed wire slow flanks enough to hold the line.

Q: Why do my high-tier runs keep failing at extraction?

Most extraction failures come from arriving late or solo. Extraction requires holding the zone for a short timer — arrive as a squad, face the enemy spawn funnels, and keep the extraction corridor barricaded from the first wave onward.